Bodaq® Velvet Metal: 11 interior film patterns

Velvet Metal is the soft metallic family: brushed, low in sheen, and diffuse rather than mirror-like. Metallic films are unforgiving of a poor substrate because they reflect along their brush direction, so these are best on flat, well-prepared panels.

Across the 11 patterns the tonal spread runs to 6 mid-tone, 5 light. Every pattern in this collection is fire rated to ASTM E84 (Class A) for US interior use, which covers the surface when it falls inside a code-driven occupancy. All 11 also carry Korea's flame-retardant approval (방염, KS F 2271), a Korea-specific designation, not the US rating. How Bodaq fire ratings work sets out how to request the per-series test report.

Every pattern in this collection shares the same physical product: 0.2 mm (8 mil) PVC film with a channelled acrylic adhesive, supplied on 48″ × 164 ft rolls and applied dry between 12 and 38 °C. The differences are the print, the emboss and the sheen. Full mechanical and chemical data is on the performance page, and the installation guide covers preparation and technique.